IMT Valve Position Sensor Replacement

WARNING: This page is about a different car, the 2006 Honda CR-V and 2005 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Remove the two screws (A) and the IMT position sensor (B).

Fig 1: Removing Two Screws And IMT Position Sensor With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the sensor with a new O-ring (C), and make sure the projection (D) inside the IMT valve matches up with the groove (E) in the sensor.