TPMS Reset Procedures: Notes

NOTE: When a tire pressure sensor or control unit is replaced, or a known-good wheel is substituted, the ID(s) of all four tires' sensors must be memorized by the TPMS control unit. See Memorizing Sensor ID . After memorizing the sensor ID(s) or doing a tire rotation, the mounting location of sensors 1, 2, 3 and 4 must be determined. See Sensor Location .

When the tire pressure warning light illuminates and warning message appears, immediately check air pressure of all tires and adjust to the specified pressure. Drive vehicle above 28 mph (45 km/h) for a few minutes. Ensure warning indicators go out.