FixVault

GPS Antenna Removal/Installation

  1. Remove the AUDIO-NAVIGATION UNIT  .
  2. Remove the center panel (see CENTER CONSOLE REMOVAL/INSTALLATION .
  3. Remove the TPMS control unit (see TPMS CONTROL UNIT REPLACEMENT .
  4. Remove the wire harness clip (A), screws and GPS antenna (B).
    Fig 1: Locating Wire Harness Clip, Screws And GPS Antenna
    G08049698Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the antenna in the reverse order of removal.