FixVault
Home › Honda › 2007 › Element SC, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Keyless/Power Door Locks/Security System › Rear Door Switch Test

Rear Door Switch Test

  1. Remove the rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector (A) from the rear door upper and rear door lower switch.
    Fig 1: Identifying Rear Door Switch 2P Connector Terminals
    G05451544Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the 2P connector terminals No. 1 and No. 2.
    • There should be continuity with the rear door open.
    • There should be no continuity with the rear door closed.
  4. If the continuity is not as specified, replace the faulty switch.
About FixVault