FixVault
Home › Honda › 2007 › Element SC, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Openers › Tailgate Handle Replacement

Tailgate Handle Replacement

NOTE:
  • Take care not to scratch the tailgate.
  • Put on gloves to protect your hands.
  1. Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
  2. Disconnect the tailgate opener rods (A) on both sides from the tailgate handle (B).
    Fig 1: Identifying Tailgate Handle Open Rods
    G05451214Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screws, then remove the tailgate handle (A).
    Fig 2: Identifying Tailgate Handle Screws
    G05451215Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the tailgate handle in the reverse order of removal, and note these items:
    • Make sure opener rod is connected securely.
    • Make sure the tailgate locks and opens properly.
About FixVault