FixVault
Home › Honda › 2007 › Element SC, Standard › Repair and Diagnosis › Body & Frame › Exterior Body Panels › Hatch › Hatch Support Strut Replacement

Hatch Support Strut Replacement

NOTE:
  • Use eye protection when prying the support strut clips.
  • Have an assistant hold the tailgate up while you replace the support struts.
  1. With the help of an assistant, use a flat-tip screwdriver (A) to pry the support strut clips (B) from each end of the support strut (C) at the hatch and body, then release the support strut from the pivot bolts (D). Do not remove the clips from the support strut.
    Fig 1: Prying Support Strut Clips From Each End Of Support Strut
    G05451138Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the bolts, then remove the bracket (A) from the hatch, and remove the pivot bolt (B).
    Fig 2: Removing Bracket From Hatch
    G05451139Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Set the clips (A) to the original position, then reattach the support strut (B) on the pivot bolts (C) by pushing on the support strut.
    Fig 3: Attaching Support Strut On Pivot Bolts
    G05451140Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault