FixVault
Home › Honda › 2007 › Element SC, Standard › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Dashboard › Driver's Dashboard Panel Removal/Installation

Driver's Dashboard Panel Removal/Installation

NOTE: Take care not to scratch the dashboard and related parts.
  1. Open the driver's door, and gently pull out on the front of the dashboard side lid (A) to release the hooks (B), then remove the lid.
    Fig 1: Pulling Out On Front Of Dashboard Side Lid
    G05451026Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Tilt the steering column down.
  3. Remove the driver's dashboard panel (A).
    1. Remove the screw.
    2. Gently pull out the panel to release the clips and the hooks (B).
      3. Fig 2: Identifying Driver's Dashboard Panel & Hooks
      G05451027Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the panel in the reverse order of removal, and note these items:
    • If the clips are damaged or stress-whitened, replace them with new ones.
    • Push the clips and the hooks into place securely.
About FixVault