Tailgate Cladding Replacement

NOTE:

Remove the tailgate weatherstrip as needed (see TAILGATE WEATHERSTRIP REPLACEMENT ).
Open the tailgate.
Remove the bolts securing the tailgate cladding.

Fig 1: Tailgate Cladding Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Pull out along the upper and lower edges on the tailgate cladding (A) to release the clips, then remove the cladding from the tailgate, and disconnect the rear license light connectors (B).

Fig 2: Pulling Out Tailgate Cladding & Rear License Light Connectors
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cladding in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Make sure the rear license light connectors are plugged in properly.
- Push the clip portions into place securely.
- Reinstall tailgate weatherstrip.