CMP Pulse Plate A Replacement

Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL ).
Hold the intake camshaft with an open-end wrench, then loosen the bolt.

Fig 1: Holding Intake Camshaft With Open-End Wrench
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the camshaft position (CMP) pulse plate A.

Fig 2: Camshaft Position (CMP) Pulse Plate A With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the CMP pulse plate A in the reverse order of removal.