Without Navigation System

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
Do not work in a dusty or dirty place.
Discharge static electricity from your body before and during the work.
Do not touch the circuit board with your bare hands.
Do not work with dirty hands.
Be careful not no fold the flat plate cable.
Do not touch the terminal connector of the flat plate cable with your bare hands. (If you have touched it, wipe it off thoroughly.)

Remove the audio unit (see WITHOUT NAVIGATION SYSTEM ).
Remove the mounting screws, then remove the audio switch panel (A) from the audio unit (B).

Fig 1: Identifying Audio Switch Panel, Audio Unit And Mounting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio switch panel in the reverse order of removal.