FixVault
Home › Honda › 2007 › Element SC, Standard › Repair and Diagnosis › General Information › Reset Procedures › Tire Pressure Monitor Systems - Except Touring › TPMS Reset Procedures › Tire Pressure Sensor Registration › Sensor Location

Sensor Location

NOTE: The TPMS Sensor Tool (AKS0620006) has been superceded by the ATEQ VT55 tool, and is recommended for use on all Honda vehicles.
  1. With the ignition OFF, connect the HDS to the 16-pin Data Link Connector (DLC) located under the left side of the dashboard.
  2. Turn the ignition switch ON, and verify that HDS is communicating with the TPMS control unit.
  3. Follow the prompts on the HDS to activate the tire pressure sensors using the ATEQ VT55 tool (recommended), or the TPMS sensor tool AKS0620006. Start with the left-front (LF) wheel. Initialize the wheels in the following order - left front (LF), left-rear (LR), right-rear (RR), right front (RF).
  4. Check the HDS screen, and note the active sensor reception order of tire pressure sensors 1, 2, 3 and 4.
  5. Note the sensor location for future reference.
  6. Turn the ignition switch OFF.
About FixVault