Special Tools Required

Remove the bearing set plate (A) from the clutch housing (B).

Fig 1: Identifying Bearing Set Plate & Clutch Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the needle bearing (A) using the 20-40 mm adjustable bearing puller (B) and a commercially available 3/8 "-16 UNF slide hammer (C), then remove the oil guide plate C (D).

Fig 2: Identifying Needle Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Position the oil guide plate C (A) and new needle bearing (B) in the bore of the clutch housing (C).

Fig 3: Identifying Oil Guide Plate C, Needle Bearing & Clutch Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the needle bearing using the oil seal driver (D).
Install the bearing set plate (A) with bolts (B).

Fig 4: Bearing Set Plate & Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.