FixVault
Home › Honda › 2007 › Fit Base, Automatic › Repair and Diagnosis › Accessories & Equipment › Heated Glass/Defoggers › Rear Window Defogger › Switch Test/Replacement

Switch Test/Replacement

  1. Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 13P connector (A) and push out the rear window defogger switch (without A/C) or the rear window defogger and A/C switch (with A/C) (B) from behind the center panel (C).
    Fig 1: Identifying Rear Window Defogger Switch 13P Connector Terminals
    G05456738
  3. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Rear Window Defogger Switch Terminals Continuity Reference Chart
    G05456739
  4. If the continuity is not as specified, replace the bulb (D) or the switch.
About FixVault