FixVault
Home › Honda › 2007 › Fit Base, Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System › MAP Sensor Replacement

MAP Sensor Replacement

  1. Disconnect the MAP sensor connector (A).
  2. Remove the screw (B).
    Fig 1: MAP Sensor Connector Screw With Torque Specification
    G05454648Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the MAP sensor (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
About FixVault