FixVault
Home › Honda › 2007 › Fit Base, Automatic › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heating System › Mode Control Cable Adjustment

Mode Control Cable Adjustment

  1. From under the dash, disconnect the mode control cable housing from the clamp (A), and disconnect the mode control cable (B) from the mode control linkage (C).
    Fig 1: Identifying Mode Control Cable Housing And Mode Control Cable
    G05456454Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Set the mode control dial to Vent.
  3. Turn the mode control linkage fully counterclockwise as shown above, and hold it. Attach the mode control cable to the mode control linkage, then snap the mode control cable housing into the clamp.
About FixVault