Accelerator Pedal: Inspection
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT ACCELERATOR PEDAL ROD ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard
STANDARD REFERENCE CHART
| Tester Connection |
Specified Condition |
| 5 (EP1) - 4 (VCP1) |
1M Ω or higher |
| 2 (EP2) -1 (VCP2) |
1M Ω or higher |
If the result is not as specified, replace the accelerator pedal.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.