Voice Control Switch Removal/Installation

SRS components are located in this area. Review the SRS component locations (see), and the precautions and procedures (see) before doing repairs or service.

1. Remove the switch cover (A) from left side of the steering wheel.
   Fig 1: Identifying Switch Cover From Left Side Of Steering Wheel

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the two screws (B) from the voice control switch or HFL/voice control switch (C).
3. Disconnect the 5P connector (D) and remove the voice control switch or HFL/voice control switch.
4. Install the switch in the reverse order of removal.