FixVault
Home › Honda › 2007 › Odyssey EX › Repair and Diagnosis › Engine Mechanical › Mechanical › Active Control Engine Mount (ACM) System › Engine Mount Control Unit Replacement › '07 model J35A7 engine

'07 model J35A7 engine

  1. Remove the lower glove box (see LOWER GLOVE BOX REMOVAL/INSTALLATION ), and the right kick panel (see step 2 on TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  2. Disconnect the engine mount control unit, 20P connector (A).
    Fig 1: Identifying 20P Connector And Engine Mount Control Unit
    G05522797Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the engine mount control unit (B).
  4. Install the parts in the reverse order of removal.
About FixVault