Interface Dial Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Remove the harness cover (A).

Fig 1: Identifying Harness Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the interface dial connecter (A), then remove the interface dial (B).
NOTE: If the hard buttons do not work, but the jog dial does, recheck the interface dial connector (A) connection.

Fig 2: Identifying Interface Dial Connecter And Interface Dial
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the dial in reverse order of removal.