FixVault
Home › Honda › 2007 › Pilot EX, 3.5 YF1 › Repair and Diagnosis › Brakes › Traction Control › VSA (Vehicle Stability Assist) System Components › Yaw Rate-Lateral Acceleration Sensor Replacement

Yaw Rate-Lateral Acceleration Sensor Replacement

NOTE:
  • Do not damage or drop the sensor as it is sensitive.
  • Do not use power tools.
  1. Make sure the ignition switch OFF.
  2. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  3. Disconnect the connector (A).
    Fig 1: Yaw Rate-Lateral Acceleration Sensor And Fasteners With Torque Specifications
    G05594785Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the yaw rate-lateral acceleration sensor (B).
  5. Install the sensor in the reverse order of removal.
  6. Do the VSA sensor neutral position memorization (see VSA SENSOR NEUTRAL POSITION MEMORIZATION  ).
About FixVault