3rd Clutch Transmission Fluid Pressure Switch Replacement
- Remove the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).
- Disconnect the 3rd clutch transmission fluid pressure switch connector, and remove the 3rd clutch transmission fluid pressure switch (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Make sure there is no water, oil, dust, or foreign particles inside the connector.
- Install a new 3rd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
- Connect the connector securely.
- Install the splash shield (see FRONT SPLASH SHIELD REPLACEMENT
).