FixVault
Home › Honda › 2007 › Ridgeline RTS › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › A/T Interlock System › Park Pin Switch Test

Park Pin Switch Test

  1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL  ).
  2. Disconnect the D3 switch/shift lock solenoid/park pin switch connector.
    Fig 1: Checking Continuity Between D3 Switch/Shift Lock Solenoid/Park Pin Switch Connector Terminals No.1 And 2
    G05592638Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Move the shift lever into P, then check for continuity between D3 switch/shift lock solenoid/park pin switch connector terminals No. 1 and No. 2. There should be no continuity.
  4. Move the shift lever out of P, and check for continuity between terminals No. 1 and No. 2. There should be continuity.
  5. If the park pin switch is faulty, replace it (see PARK PIN SWITCH REPLACEMENT  ).
  6. Install the shift lever assembly (see SHIFT LEVER INSTALLATION  ).
About FixVault