FixVault
Home › Honda › 2008 › Civic GX › Repair and Diagnosis › Engine Performance › System › Variable Valve Timing Electronic Control System (VTEC - R18A1 Engine) › EOP Sensor Removal/Installation

EOP Sensor Removal/Installation

  1. Remove the cowl cover and under-cowl panel (see COWL COVER REPLACEMENT ).
  2. Disconnect the EOP sensor connector (A).
    Fig 1: Disconnecting EOP Sensor Connector (Specifications)
    G04665428Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bracket (B) and the EOP sensor (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
About FixVault