Fuel Tank Unit Removal and Installation: Removal

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Remove the fuel fill cap.
Remove the second row seat.
Peel back the rear carpet as needed.
Remove the access panel (A) from the floor.

Fig 1: Identifying Access Panel And Fuel Tank Unit 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the fuel tank unit 5P connector (B).
Disconnect the quick-connect fittings (C) from the fuel tank unit.
Using the special tool, loosen the locknut (A).

Fig 2: Identifying Locknut Using Special Tool
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the locknut (A) and the fuel tank unit (B).

Fig 3: Identifying Locknut And Fuel Tank Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.