2000-05 Models

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the actuator cover, and disconnect the 4P connector from the cruise control actuator.

Fig 1: Disconnecting 4P Connector From Cruise Control Actuator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the actuator cable end (A) from the output linkage (B), and remove the cable (C) from the cruise control actuator.

Fig 2: Removing Cable From Cruise Control Actuator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the cruise control actuator assembly.

Fig 3: Removing Cruise Control Actuator Assembly With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Replace the actuator, and install the new cruise control actuator in the reverse order of removal.
Adjust the actuator cable on the cruise control actuator side (see CRUISE CONTROL ACTUATOR CABLE ADJUSTMENT ).