FixVault
Home › Honda › 2009 › Element SC, Automatic › Repair and Diagnosis › External Pages › Different car › Section 143 (Interior Lights) › Front Individual Map Light Test/Replacement

Front Individual Map Light Test/Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the map light switch OFF.
  2. Carefully pry the lens (A) off with a flat-tip screwdriver.

    Front Individual Map Light: 8 W x 2 

    Fig 1: Locating Lens
    G06968864Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the two screws, then remove the front individual map lights (B).
  4. Disconnect the connectors (C) from the map lights.
  5. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Identifying Map Light Switch Continuity Chart
    G06968865Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the map light.
  7. Install the light in the reverse order of removal.
About FixVault