FixVault

Vanity Mirror Light Test/Replacement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector (A) from the sunvisor (B).

    Vanity Mirror Light: 1.4 W x 2 

    Fig 1: Identifying Sunvisor Connector
    G06968869Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each vanity mirror cover (C) position according to the table.
    Fig 2: Identifying Sunvisor Connector Continuity Chart
    G00523697Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, check the bulbs (D). If the bulbs are OK, the vanity mirror light is faulty; replace the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
  5. Install the parts in the reverse order of removal.