Alternator Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Install the alternator (A), then tighten the mounting bolts (B) and the alternator bracket (C).

Fig 1: Alternator And Alternator Bracket With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the push pin to the coolant reservoir (A), then install the power steering reservoir (B) to the clamp.

Fig 2: Identifying Power Steering Reservoir And Coolant Reservoir Push Pin
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the A/C compressor (A).

Fig 3: A/C Compressor With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the bolt (A) securing the harness holder.

Fig 4: Harness Holder Bolt With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect the alternator connector (B), the A/C compressor clutch connector (C), and the positive alternator cable (D) to the alternator. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.
Install the drive belt (see DRIVE BELT REPLACEMENT ).
Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).