Rewriting the ODO Data on a New Gauge Control Module: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Obtain a new gauge control module before starting the rewriting process. Only new gauges can be rewritten.
Rewriting is not possible on a gauge control module that will not communicate with the HDS.
Make sure that the HDS shows the correct VIN for the vehicle you are working on.
Once you have started this procedure, you must complete it before removing the HDS from the Data Link Connector (DLC).
Connect a jumper battery (do not connect a battery charger) to insure that correct battery voltage is maintained.
Check any official Honda service website for more service information about the odometer.