| Cruise control cannot be set |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Check the No. 13(20 A) fuse in the under-hood fuse/ relay box, and No. 18 (15 A) fuse in the driver's under-dash fuse/relay box.
- Do the cruise control combination switch test:
- Do the CRUISE CONTROL INPUT TEST (see
).
|
Poor ground G101 |
| Cruise control can be set, but the cruise main indicator does not come on |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the gauge control module self-diagnostic function procedure (see
SELF-DIAGNOSTIC FUNCTION
).
- Do the CRUISE CONTROL INPUT TEST (see
).
|
Faulty gauge control module |
| Cruise control can be set, but the cruise control indicator does not come on |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the gauge control module self-diagnostic function procedure (see
SELF-DIAGNOSTIC FUNCTION
).
- Do the CRUISE CONTROL INPUT TEST (see
). Test the cruise control indicator signal input.
|
Faulty gauge control module |
| Vehicle does not decelerate or accelerate accordingly when the set/ decel or resume/accel switch is pressed |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the cruise control combination switch test:
- Do the CRUISE CONTROL INPUT TEST (see
). Test the set/decel, resume/accel switch signal input.
|
Open circuit, loose or disconnected terminals: LT GRN/BLK or GRY/RED |
| Set speed does not cancel when the brake pedal is pressed |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the brake pedal position switch test (see
BRAKE PEDAL POSITION SWITCH TEST
).
- Do the CRUISE CONTROL INPUT TEST (see
). Test the brake pedal position switch signal input.
|
- Short to power on the BRN wire
- Faulty brake pedal position switch
|
| Set speed does not cancel when the cruise control main switch is pressed |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the cruise control combination switch test:
- Do the CRUISE CONTROL INPUT TEST (see
). test the cruise control main switch signal input.
|
Short to ground on the LT GRN wire |
| Set speed does not cancel when the cancel switch is pressed |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Do the cruise control combination switch test:
- Do the CRUISE CONTROL INPUT TEST (see
). Test the cancel switch signal input.
|
Open circuit, loose or disconnected terminals: LT GRN/BLK or GRY/RED |
| Set speed will not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal) |
- Check for PGM-FI and body DTCs (see
HOW TO USE THE HDS (HONDA DIAGNOSTIC SYSTEM)
).
- Check the brake pedal position switch adjustment, (seepage 19-6).
- Do the cruise control combination switch test:
- Do the CRUISE CONTROL INPUT TEST (see
). Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.
|
- Faulty brake pedal position switch
- Open circuit, loose or disconnected terminals: LT GRN/BLK
- After market brake light bulbs that can cause false inputs
|
| With the ignition switch in ON (II), and the lighting switch turned on, the cruise control combination switch illumination does not come on |
Check the cruise control combination switch:
|
|