HandsFreeLink Control Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Tell the customer they need to write down all phone numbers as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.

Remove the center lower cover (see DASHBOARD CENTER LOWER COVER REMOVAL/INSTALLATION ).
Remove the volts and pull the DVD player unit (A) down.

Fig 1: Identifying DVD Player Unit And Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the harness clip (A) and disconnect the connector (B).

Fig 2: Identifying Harness Clip, Connector And Handsfreelink Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws and HandsFreeLink control unit (C).
Install the HandsFreeLink control unit in the reverse order of removal.
- They need to pair the phones to the system.
- They need to set up their system preferences.