FixVault
Home › Honda › 2009 › S2000 Base › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel And Emissions Systems › General Troubleshooting Information › ECM Reset

ECM Reset

  1. Reset the ECM with the HDS while the engine is stopped.
  2. Turn the ignition switch OFF.
  3. Turn the ignition switch ON (II), and wait 30 seconds.
  4. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
  5. Do the ECM idle learn procedure (see ECM IDLE LEARN PROCEDURE ).
About FixVault