FixVault
Home › Honda › 2009 › S2000 Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heating System › Blower Unit Removal/Installation

Blower Unit Removal/Installation

  1. Remove the passenger's dashboard lower cover and the right kick panel (see PASSENGER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Disconnect the dashboard wire harness connector from the passenger's door wire harness connector, then remove it. Remove the wire harness connectors and the convertible top control unit from the steering hanger beam.
  3. Disconnect the connectors (A) from the blower motor, the power transistor and the recirculation control motor, then remove the wire harness clips (B). Remove the self-tapping screw, the mounting bolts, the mounting nuts and the blower unit (C).
    Fig 1: Identifying Blower Unit Remove/Install Components
    G05115927Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install in the reverse order of removal. Make sure that there is no air leakage.
About FixVault