FixVault
Home › Honda › 2010 › CR-V EX, 2.4 RE3 › Repair and Diagnosis › Engine Performance › System › PGM-FI System › MAF Sensor/IAT Sensor Replacement

MAF Sensor/IAT Sensor Replacement

  1. Disconnect the MAF sensor/IAT sensor connector (A).
    Fig 1: MAF Sensor/IAT Sensor Connector, Screws And MAF Sensor/IAT Sensor With Torque Specification
    G06610408
  2. Remove the screws (B).
  3. Remove the MAF sensor/IAT sensor (C).
  4. Install the parts in the reverse order of removal with a new O-ring (D).
About FixVault