FixVault
Home › Honda › 2010 › Element SC, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Openers › Hatch Latch Replacement

Hatch Latch Replacement

NOTE: Put on gloves to protect your hands.
  1. Remove the hatch trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREA ).
  2. Disconnect the hatch opener cable (A), cylinder rod (B), hatch latch actuator connector (C), and hatch latch switch connector (D), and detach the connector.
    Fig 1: Hatch Opener Cable, Cylinder Rod, Hatch Latch Actuator Connector & Hatch Latch Switch Connector With Torque Specification
    G05451211Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts, then remove the hatch latch (E).
  4. Install the hatch latch in the reverse order of removal, and note these items:
    • Make sure the connectors are plugged in properly and the opener cable is connected properly.
    • Make sure the opener cable actuates the latch before you close the hatch.
    • Make sure the hatch opens properly and locks securely.
About FixVault