FixVault
Home › Honda › 2010 › Element SC, Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System › Output Shaft (Countershaft) Speed Sensor Replacement › M/T model

M/T model

NOTE: A/T model (see INPUT SHAFT (MAINSHAFT) SPEED SENSOR REPLACEMENT ).
  1. Remove the air cleaner (see AIR CLEANER ELEMENT INSPECTION/REPLACEMENT ).
  2. Disconnect the output shaft (countershaft) speed sensor connector (A).
    Fig 1: Output Shaft (Countershaft) Speed Sensor, Connector And O-Ring With Torque Specifications
    G06267518Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the output shaft (countershaft) speed sensor (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C) coated with clean engine oil.
About FixVault