FixVault
Home › Honda › 2010 › Element SC, Standard › Repair and Diagnosis › External Pages › Different car › Section 101 (Electronic Throttle Control System) › Accelerator Pedal Module Removal/Installation

Accelerator Pedal Module Removal/Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the APP sensor connector (A).
    Fig 1: APP Sensor Connector And Accelerator Pedal Module With Torque Specifications
    G06964002Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
About FixVault