FixVault
Home › Honda › 2010 › Element SC, Standard › Repair and Diagnosis › External Pages › Different car › Section 137 (Power Windows) › Resetting the Power Window Control Unit › Without the HDS

Without the HDS

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do the reset procedure from the power window switch of the affected window.
  1. Turn the ignition switch to ON (II).
  2. Move the power window all the way down by using the power window DOWN switch.
  3. Open the driver's or front passenger's door.
  4. Do the following four times before going to step 5:
    NOTE: Do each bullet step within 5 seconds of each other.
    • Turn the ignition switch to LOCK (0).
    • Push and hold the power window DOWN switch.
    • Turn the ignition switch to ON (II).
    • Release the power window DOWN switch.
  5. Confirm that AUTO UP no longer works. If AUTO UP still works, repeat step  4, paying close attention to the 5 seconds time limit.
  6. Move the power window all the way down using the power window DOWN switch.
  7. Pull up and hold the power window UP switch until the power window is all the way up, then continue to hold the switch for several seconds.
  8. Confirm that the power window control unit is reset by using the power window AUTO UP and AUTO DOWN function. If the power window still does not work in AUTO, repeat the procedure several times, paying close attention to the 5 seconds time limit between each bulleted step. If window still does not work, troubleshoot the power window circuit.
About FixVault