Gauge Control Module Replacement

Remove the instrument panel ( INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.

Fig 1: Identifying Gauge Control Module And Protective Cloth
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (C), and remove the gauge control module.
Install the gauge in the reverse order of removal.
Rewriting the ODO data and transfer the maintenance minder data to a new gauge control module (see Rewriting the ODO Data and Transferring the Maintenance Minder Data to a New Gauge Control Module ).