System Diagnostic Mode: F-Can
WARNING: This page is about a different car, the 2013 Honda Fit and 2012 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
F-CAN (Fast Controller Area Network) passes information between processors on the network. For example, the F-CAN network passes trip computer information between the gauge and the audio-navigation unit for the trip computer function.
The F-CAN network uses a communication protocol that transmits data at 500 Kbps.
- This diagnosis must have the engine running.
- If F-CAN shows ERROR ACTIVE, an error is not detected between F-CAN bus and the audio-navigation unit. If any error is detected, check for diagnostic trouble codes (DTCs) for the F-CAN with the HDS (Honda Diagnostic System). The data displayed in the ID boxes is for factory use only.