FixVault

GPS Antenna Removal/Installation

WARNING: This page is about a different car, the 2013 Honda Fit and 2012 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION  ).
  2. Remove the gauge control module GAUGE CONTROL MODULE REPLACEMENT
  3. Remove the screws (A) from the GPS antenna (B).
    Fig 1: Identifying GPS Antenna And Screws
    G08083241Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the wire harness clips (A), the screws, and the GPS antenna (B).
    Fig 2: Identifying GPS Antenna And Wire Harness Clips
    G08083242Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the GPS antenna in the reverse order of removal.