HFL Switch Test

SRS components are located in this area. Review the SRS component location (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS section before doing repairs or service.

1. Remove the HFL-navigation voice control switch (see VOICE CONTROL SWITCH TEST ).
   Fig 1: Identifying HFL-Navigation Voice Control Switch Connector Terminals

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Measure the resistance between terminals No. 3 and No. 4 in each switch position according to the table.

   HFL Switch 

   RESISTANCE REFERENCE CHART
   
   

   Position	Resistance
   No button pressed	About 1 k Ω
   HFL Talk button pressed	About 185 Ω
   HFL Back button pressed	About 45 Ω

3. If the resistance is not as specified, replace the HFL-navigation voice control switch (see VOICE CONTROL SWITCH TEST ).