FixVault
Home › Honda › 2011 › Insight Base › Repair and Diagnosis › External Pages › Different car › Section 1 (Interior Lights) › Hatch Latch Switch Test

Hatch Latch Switch Test

WARNING: This page is about a different car, the 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hatch.
  2. Remove the hatch lower trim panel (see TRIM REMOVAL/INSTALLATION - HATCH AREAS ).
  3. Disconnect the 2P connector (A) from the hatch latch assembly (B).
    Fig 1: Identifying 2P Connector And Hatch Latch Assembly
    G06431613Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check for continuity between terminals No. 1 and No. 2.
    • There should be continuity with the hatch open.
    • There should be no continuity with the hatch closed.
  5. If the continuity is not as specified, replace the hatch lid latch assembly.
About FixVault