FixVault
Home › Honda › 2011 › Insight EX › Repair and Diagnosis › Brakes › Traction Control › VSA (Vehicle Stability Assist) System Components › VSA Off Switch Test

VSA Off Switch Test

  1. Turn the ignition switch to LOCK (0).
  2. Push out the VSA OFF switch (A) from the back of the instrument panel.
    Fig 1: Pushing VSA OFF Switch From Back Of Instrument Panel
    G06430861Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the VSA OFF switch 5P connector (B).
  4. Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the button is released, and no continuity when the button is pressed.
    Fig 2: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 1 And No. 2
    G06430862Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.
    Fig 3: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 4 And No. 5
    G06430863Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the VSA OFF switch in the reverse order of removal.
About FixVault