FixVault
Home › Honda › 2011 › Pilot EX, 3.5 4 › Repair and Diagnosis › Brakes › Traction Control › VSA (Vehicle Stability Assist) System Components › VSA Off Switch Test

VSA Off Switch Test

  1. Turn the ignition switch to LOCK (0).
  2. Remove the driver's dashboard side lid (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  3. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  4. Push out the VSA OFF switch (A) from the driver's dashboard lower cover.
    Fig 1: Identifying VSA OFF Switch
    G05963001Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.
    6. Fig 2: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 1 & No. 2
    G05963002Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.
    7. Fig 3: Checking Continuity Between VSA OFF Switch 5P Connector Terminals No. 4 & No. 5
    G05963003Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Install the VSA OFF switch in the reverse order of removal.
About FixVault