FixVault
Home › Honda › 2011 › Pilot EX, 3.5 4 › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Assembly › Front Engine Mount Removal and Installation › Installation

Front Engine Mount Removal and Installation: Installation

  1. Install the front engine mount (A).
    Fig 1: Front Engine Mount & Bolts With Torque Specifications
    G05960878Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the jack and the wood block.
  3. Tighten the front engine mount bolt (A), then install the front engine mount stop (B).
    Fig 2: Front Engine Mount Bolt, Front Engine Mount Stop & Actuator Connector With Torque Specifications
    G05960879Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Connect the front engine mount actuator connector (C).
  5. Install the radiator (see RADIATOR AND FAN REPLACEMENT ).
About FixVault