FixVault
Home › Honda › 2012 › Accord SE › Repair and Diagnosis › Engine Performance › System › PGM-FI System (4-CYL) › ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

  1. Remove the front splash shield, (see FRONT SPLASH SHIELD REPLACEMENT )
  2. Drain the engine coolant (see COOLANT CHECK ).
  3. Disconnect the ECT sensor 2 connector (A), then remove ECT sensor 2 (B).
    Fig 1: ECT Sensor 2 Connector With Torque Specifications
    G07341552Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install ECT sensor 2 with a new O-ring (C).
  5. Install the front splash shield, (see FRONT SPLASH SHIELD REPLACEMENT )
  6. Refill the radiator with engine coolant (see COOLANT CHECK ).
About FixVault