FixVault
Home › Honda › 2012 › CR-Z Base, Standard Trans › Repair and Diagnosis › Body & Frame › Windows › Power Windows › Power Window Motor Removal and Installation › Removal

Power Window Motor Removal and Installation: Removal

  1. Remove the door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
  2. Remove the door glass and regulator (see DOOR GLASS AND REGULATOR REPLACEMENT ).
  3. Remove the three screws (A), then remove the power window motor (B).
    Fig 1: Identifying Power Window Motor And Screws
    G06954053Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault