FixVault
Home › Honda › 2012 › Crosstour 2.4L Eng VIN 3 › Repair and Diagnosis › Engine Mechanical › Mechanical › Active Control Engine Mount System › Engine Mount Control Unit Replacement

Engine Mount Control Unit Replacement

  1. Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
  2. Remove the driver's under-dash fuse/relay box.
  3. Disconnect the engine mount control unit 16P connector (A).
    Fig 1: Engine Mount Control Unit 16P Connector And Engine Mount Control Unit With Torque Specifications
    G06418993Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the engine mount control unit (B).
  5. Install the parts in the reverse order of removal.
  6. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
About FixVault