DTC 1301: GPS Antenna Error
NOTE:
- Check the vehicle battery condition first BATTERY TEST
- This navigation DTC sets when there is poor connectors or loose terminals at the GPS antenna connector or an open in GPS antenna lead.
- Before you troubleshoot, make sure to follow the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- Check any official Honda service website for more service information about the navigation system.
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for the hard error code (see HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS)
).
Is DTC 1301 indicated?
YES -The failure is duplicated, go to step 4.
NO -Intermittent failure, the system is OK at this time.
- Turn the ignition switch to LOCK (0).
- Substitute a known-good GPS antenna (see GPS ANTENNA REMOVAL/INSTALLATION ).
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0), and then back to ON (II).
- Check for the hard error code (see HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS)
).
Is DTC 1301 indicated?
YES -Replace the audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
NO -Replace the original GPS antenna (see GPS ANTENNA REMOVAL/INSTALLATION ).